• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

virtuallyGhetto

  • About
  • Privacy
  • VMware Cloud
  • Home Lab
  • Nested Virtualization
  • Automation
    • VMware Kickstart
    • VMware API/SDK/CLI
    • VMware vMA/VIMA
    • VMware OVF / OVFTOOL
  • Apple Mac
  • VCSA
  • VSAN

Aquantia

ESXi on the new 2019 Apple Mac Pro

01/15/2020 by William Lam 13 Comments

Inquiries from customers on the support for ESXi on the latest 2019 Apple Mac Pro 7,1 has slowly been trickling in since the release of the system in late December. Officially, VMware currently does not support this platform and until we have a unit in-house to investigate further, this is the official stance.

With that said, several folks from the community have reached to me and shared some of their findings as it relates to ESXi with the new Mac Pro. A huge thanks goes out to Mike Rimmer who was able to go through the installation process and identified that the on-board NICs were not automatically detected by ESXI and the installation was unable to proceed. With the extensibility of the Mac Pro, Mike was able to add a supported Intel-based NIC to the system so that we could further understand the issue.

Upon closer investigation, it looks like the new Mac Pro uses two Aquantia based 10GbE NIC which is simliar to the 2018 Mac Mini which requires the Aquantia ESXi driver which was developed earlier last year.

AQC107 NBase-T/IEEE 802.3bz Ethernet Controller [AQtion]
Vendor ID: 0x1d6a
Device ID: 0x07b1

Although Mike did not have a chance to confirm this assumption, I did get validation from another customer who made the same observation when he attempted to install ESXi and once the Aquantia ESXi driver was incorporated into the latest ESXi 6.7 Update 3 image, both on-board NICs were automatically picked up by ESXi and installation was successful.

UPDATE (04/28/20) - ESXi 6.7 Patch 02 resolves a number of the issues mentioned below, please take a look at this blog post here for more details.

UPDATE 1 (01/16/19) - Thanks to our Graphics team who was kind enough to loan me their 2019 Mac Pro which literally came in yesterday! I had an idea which I wanted to run an experiment on which was to add a PCIe card w/M.2 NVMe SSD and see whether or not the Apple T2 Security Chip would have any affect on whether or not ESXi would be able to see the device. I was not super optimistic but I had a need for an additional M.2 device, so I went ahead and purchased a $15 PCIe adaptor. I was pleasantly surprise to see that ESXi not only detected the device but I was able to format a local VMFS volume and power up a functional VM! I guess this makes sense as only the Apple SSD's are cryptographically tied to the T2 chip and other PCIe devices would not be and this would allow customers to take advantage of this system right now for running non-MacOS guests (yes, T2 still affects the SMC).

🔥 BOOM! 🤜🎤🔥

PCIe adaptor w/M.2 NVMe is NOT affected by the Apple T2 Chip! ESXi is able to see the device but more importantly, I was able to format local VMFS volume and power up a VM! Guess it makes sense, Apple SSD are cryptographically tied to T2#ESXiOnMacPro2019 pic.twitter.com/hod8Irckj9

— William Lam (@lamw) January 17, 2020

I also ran another experiment by connecting a Thunderbolt 3 chassis which also had a supported M.2 NVMe to see if I was going to be lucky again. Although it looks like ESXi 6.7 Update 3 has resolved the PSOD'ing issue, ESXi was not able to see anything on the other end.

Note: Secure Boot must be disabled on the Mac Pro before you can install ESXi, you can find the instructions in this Apple KB.


This was certainly some good news but like the 2018 Mac Mini, the new 2019 Mac Pro also ships with the Apple T2 Security Chip which has proved challenging for ESXi as mentioned here along with some known caveats. For now, I would hold off making any purchases of the new Mac Pro if you intend to run ESXi. VMware does officially support ESXi on the last current generation of Mac Pro 6,1 along with Mac Mini 6,2 and Mac Mini 7,1 which are all on the official VMware HCL.

I will continue to update this article as new information and findings are shared with me.

Share this...
  • Twitter
  • Facebook
  • Linkedin
  • Reddit
  • Pinterest

Filed Under: Apple, ESXi Tagged With: apple, Aquantia, esxi, mac pro

USB Native Driver Fling for ESXi adds support for Multi-Gig (1G/2.5G/5G) Adapter

09/27/2019 by William Lam 9 Comments

Today, we have an exciting update to give on our USB Network Native Driver for ESXi Fling which has had two updates since releasing earlier this year and has been extremely well received by the VMware community. As many of you know, I am always on the look out for new and innovative tech that can help enable our customers, especially when it comes to building home labs to learn about the latest and greatest VMware software.

UPDATE (06/08/20) - QNAP has just published the updated firmware for their QNA-UC5G1T USB NIC which resolves some of the performance issue observed with the initial release.

Several months back, I came to learn about a really cool USB-based Multi-Gigabit Network Adapter (QNA-UC5G1T) from QNAP which can negotiate with speeds up to 1Gbps, 2.5Gbps and 5Gbps. I was not familiar with the multi-gig specification but it it looks like it was created as a standard back in 2016 as IEEE 802.3bz. This initially evolved from advancements in wireless technology but more recently it started to make its way into ethernet-based devices.

Although this particular device is from QNAP, the underlying chipset is actually from Aquantia, now part of Marvell. If the name sounds familiar, it should as Aquantia is also the vendor to Apple for their 10GbE NICs in both the 2018 Mac Mini and new iMac Pros. In fact, their chipsets are also used in a number of Thunderbolt 3 to 10GbE NICs which also works with ESXi. Access to 10GbE is certainly more common these days but it certainly is not for everyone and not all platforms can be expanded to support it.


The QNA-UC5G1T device is not only small but because it is USB-based, you are more likely to have spare USB ports on your system than say a traditional PCIe slot or Thunderbolt 3 port. From a cost standpoint, this device is about half the cost of the 10GbE Thunderbolt adapter coming in at $79 USD and can be ordered from Amazon. As far as I know, QNAP is the only vendor who has produced a multi-gig USB adapter, but perhaps in the future, there will be other vendors.

[Read more...] about USB Native Driver Fling for ESXi adds support for Multi-Gig (1G/2.5G/5G) Adapter

Share this...
  • Twitter
  • Facebook
  • Linkedin
  • Reddit
  • Pinterest

Filed Under: ESXi, Home Lab, Not Supported, vSphere Tagged With: 2.5GbE, 5GbE, Aquantia, esxi 6.5, esxi 6.7, multi-gig, native device driver, QNAP, usb ethernet adapter, usb network adapter

New Thunderbolt 3 to 10GbE options for ESXi

04/17/2019 by William Lam 59 Comments

With the help from Aquantia, we now have an ESXi driver to enable the built-in 10GbE adaptor for both the Apple 2018 Mac Mini and the iMac Pro. Although this was exciting news for our VMware/Apple customers, I was actually more excited for what this development meant for the larger VMware Community when it comes to 10GbE accessibility.

Many Enterprise customers have already been using Thunderbolt 2/3 to access their 10 Gigabit infrastructure, usually over SFP+ but Ethernet based options also exists such as the Sonnet solution which I had shared last year. This is especially common for VMware customers who virtualize Apple MacOS on vSphere for MacOS/iOS development and the use of Thunderbolt enables ESXi to connect to the underlying storage and networking infrastructure, which traditionally has been either Fibre Channel and/or IP-based storage running over a 10Gig link.

When you start looking at 10GbE accessibility for VMware home labs which could potentially apply to remote office/branch office (ROBO) and Edge/IoT environments, the cost and the complexity of the setup is something that many folks have to consider. There are definitely some creative options out there, most recently Chad Moon shared his solution using a Thunderbolt 3 to PCIe expansion chassis with his Intel NUCs which will run you about $230 per setup or you can be a true hardware hacker like Jack Harvest and use one of the M.2 slots in the Intel Skull Canyon NUC and connect that to PCIe 10GbE SFP+ card with a custom 3D printed chassis to hide everything for just $43.68 🙂

[Read more...] about New Thunderbolt 3 to 10GbE options for ESXi

Share this...
  • Twitter
  • Facebook
  • Linkedin
  • Reddit
  • Pinterest

Filed Under: ESXi, Home Lab, NSX, VSAN, vSphere Tagged With: 10GbE, Akitio, Aquantia, OWC, QNAP, Sonnet, thunderbolt 3

Aquantia 10GbE ESXi Driver for Apple 2018 Mac Mini

04/10/2019 by William Lam 21 Comments

I know many of you have been anxiously waiting for ESXi to be fully functional on the latest Apple Mac Mini (2018), unfortunately I do not have any news to share with you on that front. Without help from Apple, we are still challenged with Apple's new T2 chip, which prevents us from accessing the underlying NVMe device.

UPDATE (04/27/20) - Marvell (formally Aquantia) has just released an official Native ESXi Driver for their AQtion based network adaptors which you can find here and for the complete list of supported devices using this driver, please refer to the VMware HCL here.

Having said that, I do have some exciting news regarding the built-in 10Gigabit Ethernet adaptor on the 2018 Mac Mini. The 10GbE adaptor uses an Aquantia chipset, this is also the same chipset used in Apple's high end iMac Pro which was released earlier in the year. Over the past few weeks, I have been working with the Aquantia team and they have successfully ported over their open source Atlantic driver to a VMKlinux driver for ESXi, which they have published here. Although the local NVMe device can not be used to run any VMs, with the network fully enabled, customers could take advantage of this model and connect to IP-based storage to start leveraging the new Mac Mini platform.

The easiest way to incorporate the driver into the latest ESXi release is to use Image Builder within the vSphere H5 Client UI, below are the step-by-step instructions.

[Read more...] about Aquantia 10GbE ESXi Driver for Apple 2018 Mac Mini

Share this...
  • Twitter
  • Facebook
  • Linkedin
  • Reddit
  • Pinterest

Filed Under: Apple, ESXi, Home Lab Tagged With: 10GbE, apple, Aquantia, esxi, iMac Pro, mac mini

ESXi on the new 2018 Apple Mac Mini

11/09/2018 by William Lam 39 Comments

Thanks to the Green Mini Host (Apple Mac Mini hosting and collocation provider) who were the first to publicly confirm that latest release of ESXi (6.7 Update 1) works on the recently announced 2018 Apple Mac Mini.

Conforming @VMware #ESXi runs on the new Mac Mini 2018! #macmini2018 @vGhetto @lamw pic.twitter.com/DRqQ4lsWn5

— Green Mini host (@macminihost) November 7, 2018

For vSphere/vSAN Home Lab enthusiasts, the price of the new Mac Mini, especially when it is fully loaded is probably a tough sale. However, for customers developing on MacOS including iOS development, CI/CD, build farms, gaming, etc. which benefit from running on vSphere. For these customers, support for ESXi on the new Mac Mini is extremely interesting, especially with the updated hardware giving these systems a significant boost in performance even when comparing to the current Mac Pro 6,1 and iMac Pro models. In fact, I had number of folks ping me after Apple introduced it during their keynote asking if ESXi would work on the Mini's.

UPDATE (06/25/20) - The Apple 2018 Mac Mini 8,1 is now officially on the VMware HCL and is fully supported with ESXi 7.0b, which contains the fixes mentioned above. See note below on 06/23 for more information.

UPDATE (06/23/20) - ESXi 7.0b has just been released and contains fixes for both the MacOS guest boot issue support for Thunderbolt 3 devices which now enables support for the vSphere 7 release. One additional enhancement, customers no longer need to configure the ESXi Advanced Setting to enable Thunderbolt 3 support, this is now automatically configured based on detecting an Apple hardware system such as an Apple Mac Mini 2018 or Apple Mac Pro 2019. This is a patch release and you will need to go to the VMware Patch Portal site to download and apply the update.

UPDATE (04/28/20) - ESXi 6.7 Patch 02 resolves a number of the issues mentioned below, please take a look at this blog post here for more details.

Disclaimer: 2018 Apple Mac Mini are NOT officially supported by VMware. The only officially supported Apple hardware platform is the Mac Pro 6,1 or Mac Pro 5,1 and Mac Mini 6,2 or Mac Mini 7,1. For more details, please refer to VMware's Hardware Compatibility List.

[Read more...] about ESXi on the new 2018 Apple Mac Mini

Share this...
  • Twitter
  • Facebook
  • Linkedin
  • Reddit
  • Pinterest

Filed Under: Apple, ESXi, Home Lab, Not Supported, vSphere Tagged With: apple, Aquantia, esxi, iMac Pro, mac mini

Primary Sidebar

Author

William Lam is a Senior Staff Solution Architect working in the VMware Cloud team within the Cloud Services Business Unit (CSBU) at VMware. He focuses on Automation, Integration and Operation for the VMware Cloud Software Defined Datacenters (SDDC)

  • Email
  • GitHub
  • LinkedIn
  • RSS
  • Twitter
  • Vimeo

Sponsors

Privacy & Cookies: This site uses cookies. By continuing to use this website, you agree to their use.
To find out more, including how to control cookies, see here: Cookie Policy